Most Markham homeowners only start thinking about basement waterproofing after they find a damp carpet edge, a musty smell, or a white chalky line along the bottom of a wall. The next question is usually the same: what actually happens if I call someone? This guide walks through a basement waterproofing job from the first visit to the final cleanup, so you know what to expect, how to prepare, and which questions to ask. It comes from about 20 years of hands-on construction and roughly 15 years as one of Ontario’s top home inspectors, which is why every job starts with finding the real source of the water.

Key Takeaways

  • A good waterproofing job starts with a diagnosis, not a sales pitch: the source of the water decides the fix.
  • Most jobs follow the same path: site visit, written quote, prep, the waterproofing work itself, a water test where possible, then cleanup.
  • Interior systems manage water that gets in; exterior membranes stop it at the wall. Many Markham homes only need one, some need both.
  • Waterproofing often pairs with a sump pump or a backwater valve, which we install with a licensed plumber partner.
  • Clearing the work area and booking before you finish the basement saves time and money.

What happens during the first site visit?

We start by looking at where the water shows up and when. We check the walls and floor for staining, efflorescence, cracks, and damp patches, look at the floor drain, and walk the outside of the house to see the grading, downspouts, window wells, and any low spots where water collects. In older Markham neighbourhoods like Unionville and Markham Village, window wells and settled grading are frequent culprits. In newer areas such as Cornell, Berczy Village, and Wismer, we often see water at tie-rod holes or where the grading near the foundation has sunk. You get a clear explanation of what we found and a written quote before any work starts.

Interior or exterior waterproofing: which will you need?

The answer depends on where the water comes from and how the basement is finished. Here is how the two main approaches compare:

Factor Interior waterproofing Exterior waterproofing
How it works Collects water at the base of the wall and directs it to a sump pit Seals the outside of the foundation with a membrane and drainage layer
Where we dig Along the inside perimeter of the basement floor Outside, down along the foundation wall
Disruption Inside the basement; finished walls near the work may need to come off Yard, gardens, walkways or decks along that wall
Best for Water seeping where the wall meets the floor, high groundwater Water coming through the wall from saturated soil
Often paired with Sump pump with battery backup Crack repair, grading and downspout fixes

For a deeper comparison, see our guide to interior vs exterior basement waterproofing.

What happens on the day the work starts?

Every home is different, but a typical job follows these steps:

  1. Protect the house. We cover floors and paths between the door and the work area and set up dust control.
  2. Open up the work area. Inside, that means removing finished materials near the wall and cutting the floor along the perimeter. Outside, it means excavating along the foundation.
  3. Clean and prepare the wall. We clean the concrete and repair any leaking cracks through their full depth.
  4. Install the system. Inside, a drainage channel carries water to a sump pit. Outside, a waterproof membrane and drainage layer go on the wall.
  5. Connect the water path. If a sump pump is part of the plan, it is installed with our licensed plumber partner, ideally with a battery backup.
  6. Close up and test. We restore the floor or backfill the soil, run water where possible to confirm it flows where it should, and walk you through what was done.
  7. Clean up. Debris is removed and the area is left broom-clean.

How long does basement waterproofing take?

It depends on how much wall needs work, whether it is inside or outside, access to the area, and how much finished space has to be opened and restored. A single wall is a much shorter job than a full perimeter. We give you a realistic timeline with your written quote, so you can plan around it.

How should you prepare your Markham basement?

Use this checklist before work day:

  • Move furniture, boxes and storage at least a few feet away from the walls being worked on.
  • Take photos of any damp areas, stains, or past water damage for your own records.
  • Clear a path from the entry to the basement.
  • For exterior work, move planters, patio furniture and anything stored along that side of the house.
  • Tell us about anything hidden behind finished walls you know of, such as wiring or plumbing runs.
  • Plan for pets and kids to stay clear of the work area.

A situation we often see

A homeowner finishes a basement, and a year or two later the bottom of the drywall along one wall starts to stain and smell musty. The water had been getting in slowly all along, and the new finish simply hid it. By then the fix means removing drywall and flooring before the real waterproofing work can start. Dealing with moisture first, before the basement is finished, is almost always the easier and less costly path.

What drives the cost of basement waterproofing in Markham?

We do not quote a flat figure before seeing the basement, because the details change the job. The main factors are interior or exterior work, the length of wall involved, how much finished space must be removed and restored, access for digging, crack repair, and whether a sump pump, battery backup or backwater valve should be added. You get a clear written quote after the site visit.

Why Markham homeowners call Nehan Construction

Nehan Construction is a licensed contractor led by Yama Nehan, who brings about 20 years of hands-on construction, a construction engineering degree from George Brown (Building Renovations), and roughly 15 years as one of Ontario’s top home inspectors. That inspection background means we find where the water is really coming from before we recommend anything. We are fully insured, keep overhead low so pricing stays fair, and work with licensed electrical, plumbing, and HVAC subcontractors, including our licensed plumber partner for sump pump and backwater valve installs. We serve Markham neighbourhoods including Unionville, Markham Village, Cornell, Berczy Village and Wismer, plus Richmond Hill, Scarborough and the rest of the GTA. Learn more about our waterproofing services and see every option on our basement flood protection page.

Frequently Asked Questions

Do I have to leave my home during basement waterproofing?

Usually not. The work is limited to the basement or the outside of the house, and the rest of your home stays usable. We keep dust and debris contained to the work area.

Is interior waterproofing enough for my Markham home?

Often it is, especially when water seeps in where the wall meets the floor. If water is coming through the wall itself from saturated soil, exterior work may be the better fix. The site visit tells us which.

Do I need a sump pump with waterproofing?

Interior systems need somewhere to send the water, so a sump pump is usually part of the plan. We install it with our licensed plumber partner and recommend a battery backup for power outages.

Will waterproofing stop sewer backup?

No. Waterproofing deals with groundwater. Water rising from a floor drain points to a sewer backup, which a backwater valve is designed to stop.

Should I waterproof before finishing my basement?

Yes. It is far easier to fix moisture while the walls are open than to remove drywall and flooring later.

Seeing damp walls or water in your Markham basement? Call Nehan Construction at 647-704-7100 or email nehanconstruction@gmail.com to book a site visit.