A leaking foundation crack is one of the most common calls we get from Burlington homeowners, especially after a heavy rain or a spring thaw. Once you decide to get it fixed, the next question is simple: what actually happens on repair day? This guide walks through the visit step by step, from the first look at the wall to cleanup, so you know what to expect, how to prepare and what to ask. Whether you live in an older home in Aldershot or Roseland or a newer build in Alton Village or Orchard, the process is much the same. It draws on about 20 years of hands-on construction and roughly 15 years as one of Ontario’s top home inspectors.

Key Takeaways

  • Most single leaking cracks in a poured-concrete wall are repaired in one visit, often in a few hours.
  • The day starts with an inspection of the crack, the wall around it and the outside grading, not just the crack itself.
  • Clear about a metre of space along the wall before we arrive; finished walls need the drywall opened along the crack.
  • Interior injection can be done year-round; exterior work depends on ground conditions.
  • Nehan Construction is a licensed contractor and fully insured, and we also handle waterproofing, sump pumps and backwater valves.

How long does foundation crack repair take in a Burlington home?

For a typical leaking crack in a poured-concrete basement wall, the repair itself is usually done in one visit, often in a few hours. The injected material then needs a short time to cure. Several cracks, a finished wall that has to be opened, or a crack that needs work from the outside will take longer. We give you a time estimate after we see the wall in person.

What should you do to prepare before we arrive?

A little preparation makes the visit faster and keeps your belongings clean and dry. Use this checklist:

  • Clear about one metre (three feet) of space along the cracked wall.
  • Move boxes, shelving and anything stored on the floor near the crack.
  • If the wall is finished, tell us beforehand so we can plan to open the drywall and insulation along the crack.
  • Note when the crack leaks (after rain, during snowmelt, all the time) and take photos if you can.
  • Make sure there is a clear path from the door to the basement.
  • Keep pets and kids out of the work area for the visit.

What happens step by step on repair day?

Every job is a little different, but most interior crack repairs follow this order:

StepWhat we doWhy it matters
1. InspectLook at the crack, the full wall, the floor beside it and the grading and downspouts outside.Confirms the crack is the real water path and catches other problems early.
2. ProtectLay drop sheets and cover nearby items.Keeps dust and material off your floors and belongings.
3. Open (if finished)Remove drywall, insulation and framing covering the crack.The crack has to be reached directly to be sealed properly.
4. Clean and prepClean the crack surface and set injection ports along its length.A clean surface helps the seal bond.
5. Seal and injectSeal the face of the crack, then inject material from the bottom up.Fills the crack through the wall so water has no path in.
6. Cure and finishLet the material cure, remove ports and tidy the surface.Leaves a neat, sealed wall ready to close up.
7. Clean up and walk-throughClean the area and show you the finished repair.You see exactly what was done and what to watch.

Will the repair be done from inside or outside?

Most leaking cracks in poured-concrete walls can be repaired from inside with injection, which means no digging and no damage to your landscaping. Outside work is usually only needed when the wall has wider water problems, the crack cannot be reached well from inside, or the whole wall needs waterproofing. If that is the case, we explain why on the first visit and compare the options with you. For a closer look at the trade-offs, read our guide on crack injection vs. waterproofing the whole wall.

What does the inspection part of the visit look at?

This is where our home inspection background matters. A crack is often a symptom, not the whole story. Before we inject anything, we check:

  • Whether the crack is dry, damp or actively leaking, and whether it has stains or white deposits
  • Whether there are other cracks along the same wall
  • Whether the ground outside slopes toward the house
  • Where downspouts discharge and whether they dump water near the wall
  • Signs of moisture elsewhere in the basement, like musty smells or damp carpet

If water is pooling against the foundation, sealing one crack may not be enough on its own. We tell you plainly what we see, so you only pay for what actually fixes the problem.

A situation we often see

A homeowner notices a damp line on a basement wall after a storm, then dries it off and forgets about it until the next heavy rain. Over a season or two, the drywall near the floor starts to bubble and the room smells musty. By the time they call, the crack itself is a quick fix, but the wet insulation and drywall around it have to come out too. Calling at the first sign of moisture usually keeps the job smaller.

What drives the cost of foundation crack repair?

We do not quote a flat price without seeing the wall, because a few things change the scope a lot:

  • How many cracks need repair and how long they are
  • Whether the wall is finished and has to be opened and closed up again
  • Access to the crack (storage rooms, stairs, mechanical equipment in the way)
  • Whether the repair can be done from inside or needs outside work
  • Whether other flood protection, like a sump pump or backwater valve, makes sense at the same time

We work with low overhead and keep pricing fair, and the final price is confirmed after a site visit.

Why Burlington homeowners call Nehan Construction

Nehan Construction is a licensed contractor led by Yama Nehan, who has about 20 years of hands-on construction experience, a construction engineering degree from George Brown (Building Renovations), and about 15 years as one of the top home inspectors in Ontario. We are fully insured and licensed, and plumbing installs such as sump pumps and backwater valves are done with our licensed plumber partner. If your basement has also had sewer backup, see what happens on backwater valve installation day in Burlington, or explore all of our basement flood protection services.

Have a leaking crack in your Burlington basement? Call 647-704-7100 or email nehanconstruction@gmail.com to book a visit.

Foundation Crack Repair Burlington: FAQ

Do I need to be home during the repair?

It helps to be home at the start for the walk-through and at the end to see the finished repair. In between, you just need to give us access to the basement.

Will the repair make a mess?

Interior injection is a fairly clean job. We use drop sheets and clean up afterward. Opening a finished wall creates more dust, which we contain and remove.

Can you repair a crack in winter?

Yes. Interior injection is done inside the basement, so it can be done year-round. Exterior work depends on ground conditions.

How will I know the repair worked?

Check the wall after the next heavy rain or thaw. A properly sealed crack stays dry. If you ever see moisture again, call us and we will take a look.

Do you also install sump pumps and backwater valves?

Yes. We install both with our licensed plumber partner as part of our basement flood protection services.